Sunday, June 7, 2026

Vector ... An Inspired Scratch Build

 
This rocket is inspired by a photo I saw of a Vector-V, an OOP Semroc Bird.

Bill Eichelberger modified a scratch gooney version he named Vector G.

My version is a quite bit smaller in diameter up front (BT/C-60), a BT/C-80 Fin Can and the fins are quite a bit larger (1/4" Plywood).

A 29mm Rear Eject spool dumps the Motor and the 24" Parachute out the back.​
​
I'm going to take a shot at making the Transition and BT/C-80 as one integral piece, by sectioning the tube and coupler and folding it down into place. The internal coupler splices straddling the body tube splices. That means unobstructed room for the spool (see the Open Rocket Side View below).​
 
 
 
 



2026-07-01 Integral Transition / C-80
 
Something new (to me anyways). Pictures tell the procedure... we'll pull the C-60 tomorrow and see how it comes out. 
 








2026-07-02 The Integral C-80 Transition came out nice.... 
 
kind of looks like a Coke bottle. Sanded the o.d. to eliminate some small bumps and humps.
 
Now on to the BT-80H.​




Integral Transition / BT-80H

Formed the Integral Transition / BT-80H and glued it to the C-80. I'll release it from it's constraints tomorrow.​ 
 





2026-07-03 Finished Integral Transition

Injected some glue in between the transitions last night. Removed the rubber bands this morning and it's Hell-For-Stout.​
 

 


 
Internal Stiffener: 
 
See Open Rocket sketch below....
 








 

 
2026-07-04 Fins and Nose Cone
 


 
Gluing Fins to the C-80
 





 
2026-07-05 Fin Gussets

I'm using 1/8" Basswood as Reinforcement / Gussets. Also drilled holes thru the C-80 adjacent to the Fin Root. Wood glue is then placed over these holes and forced into them, then covered with the Basswood Gussets. The inside of the C-80 is wiped out with a paper towel and will be sanded smooth once all the Gussets are added and the the glue has dried.​
​
Hell For Stout construction.​
 





 
 Sanding The C-80 Bore

I made this sanding fixture a few years ago. It's made from a Neutrogena bottle. It literally took 45 seconds to sand the thru hole bumps off the bore.​
 
 

 2026-07-06 Titebond Quick and Thick Glue Fillets



 2026-07-07 Rustoleum Rusty Metal Primer
 


 2026-07-10 Primer Day 2
 


 2026-07-11 Primer Day 3
 


2026-07-15 Eyebolt and (!*?&) Launch Lug

Installed the Eye Bolt in the Bulkhead and sanded down the primer to glue on the Launch Lug that I forgot before priming.​
 






2026-07-16 Primered Launch Lug and Nose Cone

Getting close to adding some color to this bird.​
 

  
And some Golden Sunset Rustoleum 2X​
​
The yellow is darker than it appears in the photos, more orange 'ish tone to it.​
 


2026-07-19  Rustoleum Satin White Paint
 


2026-07-25  Spool, Swing Test, Nose Ballast, Swing Test Again

Cut, Lathe Turned and Glued the Spool​
 


 
Performed an All Up Swing Test without the Nose Ballast... and it failed.​
 
 

Added the 2.3 Ounces of nose weight and again performed the Swing Test... and it was successful.​
 




Monday, June 1, 2026

The Duck Rocket.... A Scratch Build

Spent some time at Stagecoach Reservoir in Colorado, hiking and watching waterfowl. Ducks... they're awesome in flight, especially while landing on water. Their wings curved downward, gliding for a perfect sliding landing into the water.

Here's a rocket that's designed to mimic a duck. The wings are attached to curve downward and ring fins are used to add some vertical depth, as well as stability. Powered by a 29mm Motor, featuring rear eject spool for the motor and 36" parachute.

Should be a good flyer.
 




 

 

Tuesday, May 19, 2026

 

AGM-28 Hound Dog... a Semi-Scale Scratch Build

Much like my Phaser, this rocket pushes the stability envelope.

Motor is in the lower pod, so it's technically correct. 29mm Power, Rear Eject Motor Pod Parachute design.

BT/C-60 Fuselage 
 



 


 

Monday, May 18, 2026

Point Blank.... a Semi Scale Scratch Build

Stumbled upon this on the internet today. It's a hand launched VTOL missile that's about 3 feet long. It has an X-Wing configuration for the fans.
​
Here's a link to the specifics of the VTOL: POINT BLANK​

The scaled down version features a BT-204 body, rear eject and a 29mm motor. 
 





 

 

Friday, May 15, 2026

 Vostok 1.... A Scratch Build

 A rear eject 29mm version of the famed Russian rocket that lifted Gagarin into orbit.
 



 2026-05-16 CAD Model and Preliminary Drawings